GES3S Manual – v. 1.9 March 2017
38
9 Do you have any problem by identifying an animal?
9.1
The reading distance is too short
The maximum reading distance is obtained with the transponder (tag) perpendicular to the
antenna and aimed at the centre of the antenna coil. If the tag is implanted into an animal its
orientation may not be optimal and therefore the reading distance may be reduced.
You might be close to a source of electromagnetic disturbances like video or TV. Move a few
meters away and try again.
Do not use the reader on a steel table. The metal will reduce the performance of the antenna.
The reading distance is reduced if the transponder is still in the needle.
9.2
The reader does not read the transponder
Change the angle of the reader and try again.
Some types of transponders from other manufacturers are disturbed if placed in the centre of
the reader-antenna. It is possible that some tags will not function if placed in parallel and at the
centre of the antenna. Change the direction of the tag or of the antenna.
9.3
The reader does not work
Charge the reader for at least 30 minutes and try again (recommended time for full battery
recharge = 2 hours).
Check the ambient temperature: it has to be between -5ºC and +45º C.
If you’re still having problems, please contact your dealer.
The GES3S reader is a product developed and produced by DATAMARS, Switzerland.
Should you have any suggestions or require information regarding this or other DATAMARS
products, please contact your dealer.
