manualshive.com logo in svg

Datalogic Star, Руководство пользователя, Страница: 60 / 69

Поделиться
Скачать
Datalogic Star Скачать руководство пользователя страница 60

STAR Modem™ 

56 

 

 

2 

2.5.3 

Radio Protocol Timeout (Client only) 

 
This parameter sets the valid time to wait before radio transmission between 
STAR Modem™ and a destination device is considered failed. 

 

This parameter should be set taking into consideration the radio traffic (number of 
devices in the same area). 

 

If the RS232 interface connecting the Remote Host and the destination device is 
used with ACK/NACK enabled, this parameter should be at least equal to the RX 
Timeout parameter for low traffic environments. It should be increased if there are 
many devices in the same area. 
 
 

2.5.4 

Single Store (Client only) 

 
This command is active when STAR Modem™ transmits messages/data to a 
destination device.  
It guarantees a secure control to prevent the transmission of duplicated data. 
If Single Store is enabled and STAR Modem™ does not receive any answer of 
good transmission from the destination device, it enters a special operating mode 
that stops sending new messages. When such operating mode is entered, the 
modem retries transmission itself for the number of attempts selected in the 
configuration. Once the transmission is successful, the modem continues to send 
new messages. If transmission is not successful after the number of configured 
attempts, the message is lost. 
To be absolutely sure that messages are received by the destination device, set 
Single Store to continuous. A new message will not be sent unless the previous one 
is received. If using Single Store as continuous, and the transaction is not received, 
check that the Server is active and that the STAR Modem™ configuration is correct. 
If your application requires an acknowledgement from the Remote PC, you must 
define Single Store and enable ACK/NACK From Remote Host (see par. 2.5.5). 
 
 

2.5.5 

ACK/NACK From Remote Host (Client only) 

 
This parameter sets a transmission protocol which takes place between the 
STAR Modem™ (Client) Host and the destination device Host (Remote Host). The 
transmission is influenced by the transmission mode selected (see par. 2.5.2). 
 

 

CAUTION 

Before selecting this parameter ensure that “ACK/NACK Protocol” 
is disabled (see par. 2.2.2). 

 

Содержание Star






































































Отзывы:

Нет отзывов