Datalogic Star Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 69

Datalogic Star Скачать руководство пользователя страница 55

REFERENCES

51

5

SET CUSTOM EXTENDED HEADER/TERMINATOR KEYS

The extended Header/Terminator keys for

Wedge Interface

users

can be

customized by defining them through a simple keyboard setting procedure.

For example, the Numeric Keypad keys can be set for use as Headers or
Terminators by substituting the default extended keys using this procedure.

The type of computer or terminal must be selected before activating the keyboard
setting command.

Press and release a key to set it.

Some characters may require more than one key pressed simultaneously during
normal use (refer to the manual of your PC or terminal for keyboard use). The exact
sequence must be indicated to the reader in this case pressing and releasing the
different keys.

Example:

If one has to press the "Shift" and "4" keys simultaneously on the keyboard to
transmit the character "$" to the video, to set the "$", press and release "Shift" then
press and release "4".

Each pressed and released key must generate a yellow LED blinking on the device,
otherwise repress the key. Never press more than one key at the same time, even if
this corresponds to the normal use of your keyboard.

Press "Back space" to correct a wrong key entry.

Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard
setting procedure. "SHIFT" must be repressed for each character and cannot
be substituted by "CAPS LOCK".

Set Custom Extended Header/Terminator Keys

i'#8k

i'#8k

i'#8k

Type the string above.

•

If the first 4 KEYS (Shift, Alt, Ctrl, and Backspace) are not available on your
keyboard, you can only substitute them with keys not used, or substitute them with
each other.

•

Keys 5 to 28 must be defined

Press the desired keys in the following order:

«
...
53
54
55
56
57
...
»

Содержание Star






































































Отзывы:

Нет отзывов