manualshive.com logo in svg

Datalogic QuickScan QS6500, Руководство по продукции

Поделиться
Скачать
Datalogic QuickScan QS6500 Скачать руководство пользователя страница 70

Interface Related Features

4-34

QuickScan

®

 QS6500/QS6500 BT

Wand Emulation

Supported Symbologies

The Wand Emulation interface will transmit bar code data as a wand 
device would.  This interface will transmit the following bar code sym-
bologies:

•

UPC/EAN

•

UPC/EAN  with  addons

•

Code  39

•

Full ASCII Code 39

•

Interleaved 2 of 5

•

Codabar

•

Code 128

All other bar code symbology types read by the scanner will be transmit-
ted as Code 128.

Wand Emulation Bar Code Format

The following format settings are required for the wand emulation inter-
face. These settings have been pre-configured at the factory for Wand 
Emulation scanners.

•

UPC-A bar codes must include all 12 digits.

•

UPC-E bar codes must contain 8 digits, including a system digit, 6 
data digits, and the check digit.

•

EAN-13 bar codes must have all 13 digits.

•

EAN-8 bar codes must include all 8 digits.

•

Code 39, Code 39 Full ASCII, and Pharmacode 39 bar codes must 
NOT contain start / stop characters.

•

Codabar bar codes must include the start / stop characters, pre-
sented in the ABCD format.

•

Interleaved 2 of 5 bar codes must have an even number of digits.

•

The Prefix, Suffix, and Code ID must be disabled for all symbolo-
gies

Содержание QuickScan QS6500

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды