manualshive.com logo in svg

Datalogic QuickScan QS6500, Руководство по продукции

Поделиться
Скачать
Datalogic QuickScan QS6500 Скачать руководство пользователя страница 126

Symbologies

6-38

QuickScan

®

 QS6500/QS6500 BT

EAN-8 — continued

Add-ons

Add-ons (or supplemental characters) are commonly added to the end of 
EAN-8 bar codes. The imager will read the add-ons if they are enabled 
and in the field of view. Three add-on types are supported: 2-digit, 5-
digit and UCC/EAN 128. Supported options are:

None — 

This option directs the imager to ignore add-on portion of a 

EAN-8 bar code but still read the main portion of the bar code.

2 Digits — 

The imager will read 2-digit add-ons with the EAN-8 label.

5 Digits — 

The imager will read 5-digit add-ons with the EAN-8 label.

2 and 5 Digits — 

The imager will read 2- and 5-digit add-ons with the 

EAN-8 label.

UCC/EAN 128 — 

The imager will read UCC/EAN 128 add-ons with 

the EAN-8 label.

2-Digit & UCC/EAN 128 — 

The imager will read 2-digit and UCC/

EAN 128 add-ons with the EAN-8 label.

5-Digit & UCC/EAN 128 — 

The imager will read 5-digit and UCC/

EAN 128 add-ons with the EAN-8 label.

All — 

The imager will read 2-digit, 5-digit and UCC/EAN 128 add-ons 

with the EAN-8 label.

Содержание QuickScan QS6500

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды