Datalogic QD2590-BK, Краткое руководство пользователя

Страница: 29 / 48

Programming
QUICK REFERENCE GUIDE
19
Using Programming Bar Codes
This manual contains bar codes which allow you to recon-
figure your reader. Some programming bar code labels,
like the
"Reset Default Settings" on page 19 , require only
the scan of that single label to enact the change.
Other bar codes require the reader to be placed in Pro-
gramming Mode prior to scanning them. Scan an ENTER/
EXIT bar code once to enter Programming Mode; scan the
desired parameter settings; scan the ENTER/EXIT bar code
again to accept your changes, which exits Programming
Mode and returns the reader to normal operation.
Configure Other Settings
Additional programming bar codes are available in the
PRG to allow for customizing programming features. If
your installation requires different programming than the
standard factory default settings, refer to the PRG.
Resetting Product Defaults
If you aren’t sure what programming options are in your
reader, or you’ve changed some options and want your cus-
tom factory settings restored, scan the bar code below to
reset the reader to its initial configuration. Reference the
PRG for other options, and a listing of standard factory set-
tings.
Reset Default Settings
NOTE: Factory defaults are based on the interface
type. Be sure your reader is configured for the cor-
rect interface before scanning this label. See
"Selecting the Interface Type" on page 8 for more
information.