Installing the Battery Pack
Quick Reference Guide
3
Installing the Battery Pack
To install, charge and/or do any other action on the bat-
tery, follow the instructions in this manual.
NOTE
To charge the Battery Pack, See “Charging the Batteries” on
page 5.
Datalogic recommends annual replacement of rechargeable
battery packs to ensure maximum performance.
WARNING
Do not discharge the battery using any device except for the
scanner. When the battery is used in devices other than the
designated product, it may damage the battery or reduce its
life expectancy. If the device causes an abnormal current to
flow, it may cause the battery to become hot, explode or
ignite and cause serious injury.
Lithium-ion battery packs may get hot, explode or ignite and
cause serious injury if exposed to abusive conditions. Be sure
to follow the safety warnings that follow:
• Do not place the battery pack in fire or heat.
• Do not connect the positive terminal and negative terminal of
the battery pack to each other with any metal object (such as
wire).
• Do not carry or store the battery pack together with metal
objects.
• Do not pierce the battery pack with nails, strike it with a ham-
mer, step on it or otherwise subject it to strong impacts or
shocks.
• Do not solder directly onto the battery pack.
• Do not expose the battery pack to liquids, or allow the battery
to get wet.
• Do not apply voltages to the battery pack contacts.
In the event the battery pack leaks and the fluid gets into
your eye, do not rub the eye. Rinse well with water and imme-
diately seek medical care. If left untreated, the battery fluid
could cause damage to the eye.
CAUTION
Always charge the battery at 32° – 104°F (0° - 40°C) tem-
perature range.
Use only the authorized power supplies, battery pack, char-
gers, and docks supplied by your Datalogic reseller. The use
of any other power supplies can damage the device and void
your warranty.
Do not disassemble or modify the battery. The battery con-
tains safety and protection devices, which, if damaged, may
cause the battery to generate heat, explode or ignite.
Do not place the battery in or near fire, on stoves or other
high temperature locations.
Do not place the battery in direct sunlight, or use or store the
battery inside cars in hot weather. Doing so may cause the
battery to generate heat, explode or ignite. Using the battery
in this manner may also result in a loss of performance and a
shortened life expectancy.
Do not place the battery in microwave ovens, high-pressure
containers or on induction cookware.
Immediately discontinue use of the battery if, while using,
charging or storing the battery, the battery emits an unusual
smell, feels hot, changes color or shape, or appears abnormal
in any other way.
Do not replace the battery pack when the device is turned on.
Do not remove or damage the battery pack’s label.
Do not use the battery pack if it is damaged in any part. Bat-
tery pack usage by children should be supervised
Содержание PowerScan Retail PBT9501-RT
