Datalogic PowerScan PM8300-DK, Краткое руководство пользователя

Страница: 9 / 28

Installing the Battery Pack
Quick Reference Guide 7
Charging the Batteries
Once the BC-80X0/C-8000 is powered, you can charge the reader's batteries.
Place the PowerScan
™
PM8300-DK into the BC-80X0 cradle or the C-8000
battery charger. The "Reader" LED on the cradle/battery charger turns red.
The battery is completely charged when the "Reader" LED on the cradle/battery
charger turns green.
To change the batteries, unscrew the retaining screw and extract the battery pack
from the reader handle. Then, insert the new battery pack into the reader handle
and tighten the screw. (See the following figures).
Figure 1.
Changing the Batteries
Do not incinerate, disassemble, short terminals or expose to high
temperature. Risk of fire, explosion. Use specified charger only.
Risk of explosion if the battery is replaced by an incorrect type.
Dispose of the batteries as required by the relevant laws in force.
WARNING
1
2