background image

Product Reference Guide

                           1

Chapter 1

Introduction

About this Manual

This Product Reference Guide (PRG) is provided for users seeking advanced 

technical information, including connection, programming, maintenance 

and specifications. The Quick Reference Guide (QRG) and other publications 

associated with this product are downloadable free of charge from the web-

site listed on the back cover of this manual.

Overview

Chapter 1, 

(this chapter) presents information about manual conventions, 

and an overview of the reader, its features and operation.

Chapter 2, Setup

 presents information about unpacking, cable connection 

information and setting up the reader.

Chapter 3, Configuration Using Bar Codes

 provides instructions and bar 

code labels for customizing your reader. There are different sections for 

interface types, general features, data formatting, symbology-specific and 

model-specific features.

Chapter 4, References

 provides background information and detailed 

instructions for more complex programming items.

Chapter 5, Message Formatting

 gives details for programming options. 

Appendix A, Technical Specifications

 lists physical and performance charac-

teristics, as well as environmental and regulatory specifications. It also pro-

vides standard cable pinouts and LED/Beeper functions.

Appendix B, Sample Bar Codes

 offers sample bar codes for several common 

symbologies.

Appendix C, Standard Defaults

 references common factory default settings 

for reader features and options.

Appendix D, Keypad

 includes numeric bar codes to be scanned for certain 

parameter settings.

Appendix E, Scancode Tables

 lists control character emulation information 

for Wedge and USB Keyboard interfaces.

Содержание PowerScan PD9530











































































































































































































































































































































































Отзывы: