Datalogic PowerScan PD8530, Справочное руководство

Страница: 134 / 160

POWERSCAN® PD8530
122
A HOST CONFIGURATION STRINGS
In this section we provide a description of how to modify the device configuration
using serial strings sent from the Host.
This method requires the RS-232, USB-Com, USB Bulk or USB Generic HID
interface.
The device configuration can be changed by receiving commands from the Host
through the current interface. When this method is used, the programming sequence
format is the following:
Command
Character sequence in following tables
CR $- $+
Carriage return character (0D Hex.)
Enter configuration environment
Exit and Save configuration
Example:
Beeper tone 1
Beeper low intensity
GBB1 $- CR
Carriage return character (0D Hex.)
Exit and save new configuration
GBA1 $+
Enter configuration environment
uration parameter setting removes th
Each config
e condition previously active for that
param
eter.
NOTE
Configuring some configuration commands through strings, such as
advanced formatting, may be very complex. For this reason they are
not provided in the following tables but can be configured by using
Datalogic Aladdin™ configuration program or referring to the related
section in chapter 4 of this manual.