Datalogic PowerScan D8300, Справочное руководство

Страница: 208 / 245

MESSAGE FORMATTING
199
6.3.1 Cursor Control
ESC [ n A Up n rows, no scroll
ESC [ n B Down n rows, no scroll
ESC [ n C Right n columns
ESC [ n D
Left n columns
ESC [ G CR
ESC [ r ; c H Move to row r , column c
(ESC[1;1H is the upper left character position of the display)
ESC D
Down 1 row, with scroll
ESC E CR and cursor down 1 row with scroll
ESC M
Up 1 row and scroll
NOTES :
•
Since CR is used as the message terminator, you must use ESC [ G or ESC E to
print a CR.
•
The cursor row position is not affected by the currently selected font. The
display always has 4 rows, so when writing with the large font, actually two rows
are written to: the current one and the one below it. You will need two
ESC E
commands to step from one row to the next when using the large font.
•
The cursor column position is affected by the currently selected font. Therefore,
column 6 is 36 pixels from the left border only if you last selected the 6x8 font;
otherwise it could be 48 or 72 pixels from the left border.
6.3.2 Font Selection
ESC [ 0 m Normal mode
ESC [ 7 m
Reverse mode
ESC # 4 Large font: subsequent characters are written on the current row and
the row below it using the 12x16 font which allows for two rows of
eight characters on the display.
ESC # 5
Normal font: subsequent characters are written using the 6x8 font,
which allows for four rows of sixteen characters on the display.
ESC # 7 Medium font: subsequent characters are written using the 8x8 font,
which allows for four rows of twelve characters on the display.
6.3.3 Clearing Display
ESC [ 0 K From cursor position to end of line inclusive
ESC [ 1 K
From beginning of line to cursor position (not inclusive)
ESC [ 2 K Entire line
ESC [ 0 J
From cursor position to end of display inclusive
ESC [ 1 J From beginning of display to cursor position (not inclusive)
ESC [ 2 J
Entire display; moves cursor to upper left corner on display