Datalogic MX-U81 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 66

background image

Preventive Maintenance

MX-U81 Hardware Guide

Datalogic S.r.l.

1-10

Preventive Maintenance

Warning:

There are no user-serviceable parts inside the device. To avoid electrical shock, never open the case.

Modifying or tampering with internal components will void the product warranty.

Attention: Il n'y a aucune pièce réparable par l'utilisateur à l'intérieur du dispositif. Pour éviter un choc électrique,
n'ouvrez jamais le cas. Modification ou manipulation des composants internes annulera la garantie du produit.

This section contains tips to keep your system trouble-free and operating smoothly.

•

Insure at least 1.5 inches (38.1 mm) of clearance on the sides and top of the MX-U81 Processor.

•

Periodically check mounting bolts for tightness and wear. The MX-U81 Processor should be mounted securely in a
vibration-free location.

•

Keep the outside of the unit clean and free of oil and dust. You can clean the unit with a mild cleanser.

Do not

use an

abrasive cleaner and

never

immerse the unit in water.

•

Periodic cleaning of the air inlets, filters, and exhausts is highly recommended.

•

Verify that all cable connections are correct and tight. Secure the cables to prevent accidents or damage to the device
connectors.

•

When you move the system, be careful that the movement does not loosen connections. After the system is moved, ver-
ify cable and power cord connections.

•

Repair or replace frayed or damaged cables immediately.

•

Do NOT attempt to clean the camera imager or imager cover. Do NOT spray the imager or imager cover with com-
pressed air as this may leave spots.

Before You Call

If you have a problem with your system, contact your distributor or call Datalogic S.r.l. Before calling, however, review
the installation to ensure you are not overlooking an obvious reason for the problem.

When you call for support, be prepared to answer to the following questions:

•

What are the model and serial numbers of the device you are using? The model, serial, and part numbers are located on
the rear panel of the processor.

•

Have you added, replaced, or reconfigured your hardware recently? This includes any changes to the camera or other
components.

•

What version of Impact Software you are running? Look on the title bar of one of the Impact Software components.

•

Have you updated or replaced any software on your client computer lately?

«
...
14
15
16
17
18
...
»

Содержание MX-U81



































































Отзывы:

Нет отзывов

Похожие инструкции для MX-U81

Бренд: Golden wheel Страницы: 14

Бренд: Duerkopp Adler Страницы: 25

Aria Quilting & Sewing Machine

Бренд: Baby Lock Страницы: 2

SATweb EXPLORER 510

Бренд: Globalsat Страницы: 6

Бренд: Spektrum Страницы: 44

Бренд: JUKI Страницы: 4

Бренд: JUKI Страницы: 52

Бренд: Suzuki Страницы: 29

Бренд: JUKI Страницы: 100

VIP4Tools Coaxial

Бренд: DROPSA Страницы: 11

Бренд: Yamata Страницы: 34

3700 AUT Series

Бренд: Global Страницы: 83

Бренд: Euro-Pro Страницы: 68

Бренд: Husqvarna Viking Страницы: 78

Бренд: HappyJapan Страницы: 330

Бренд: Singer Страницы: 8

Бренд: Singer Страницы: 11

Бренд: Singer Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды