Datalogic MX-E Series Скачать руководство пользователя

Страница: 22 / 120

Flat Surface Mounting

MX-E Series Hardware Guide

Datalogic S.r.l.

•

Do not exceed the flex radius of any connected cables.

UNITS: mm.

Drilling Template

Mounting Hole

Dimensions

NOTE: If the Processor uses a Compact Flash card, mount with the Processor top facing upward so the CF card
does not fall out due to vibration.

To mount the Processor:

Mark the surface mounting holes in the desired location using the drilling template dimensions.

Drill four surface mounting holes in the mounting surface. Use suitable anchors if necessary.

Insert four M5 mounting screws in the mounting holes and tighten them until approximately 0.2 inches (5 mm)
is left exposed. The mounting screws must be long enough to provide sufficient support.

Maneuver the Processor so mounting bracket slots align with the mounting screws.

Place the slots over the screws and slide the Processor down until the screws fit snugly into the mounting
bracket slots.

If necessary, tighten the mounting screws until snug.

Содержание MX-E Series

























































































































Результаты поиска

Содержание MX-E Series

Отзывы:

Похожие инструкции для MX-E Series

Бренды по названию

Популярные бренды

Datalogic MX-E Series, Руководство по оборудованию

Результаты поиска

Содержание MX-E Series

Отзывы:

Похожие инструкции для MX-E Series

Бренды по названию

Популярные бренды