© 2009 - 2011 Datalogic Scanning, Inc.
820044614 (Rev A)
October / 2011
Installation Using Screws
1.
Use the template provided in
to mark the surface for drilling. For reference, the front/top of
the holder is marked on both the template and on the holder itself.
2.
Drill both holes using a 0.136” (#29) drill bit. Drill at least 5/8” deep if drilling into solid material.
3.
Secure the holder to the surface using the provided screws, being careful to not overtighten them.
Figure 2. Drilling Template
CAUTION
Use the supplied screws only when mounting to sheet metal and/or wood.
