manualshive.com logo in svg

Datalogic MAGELLAN 8300, Руководство по продукции

Поделиться
Скачать
Datalogic MAGELLAN 8300 Скачать руководство пользователя страница 488

A-4

Magellan

®

 8300/8400

Table A-2. Volume/Tone Push Button Functions

PRESS

DURATION

FUNCTION

COMMENT

Momentary (when 
scanner is asleep)

Wakes scanner from Sleep 
Mode

Alternatively, the scanner can be awakened by:
- Moving an object through the scan zone.
- A weight change on the scale.
- Scanning with an attached auxiliary scanner.

Momentary (when 
scanner is awake)

Increments volume

Press the push button momentarily to increase speaker 
volume. When the loudest volume is reached, a 
repeated press of the push button cycles volume back 
to the lowest setting, then volume increases on subse-
quent press(es). Four volume levels are available.

Hold, then release 
when the beeper 
sounds

Increments tone

Press the push button for approximately 2 seconds, 
then release. Each time this is done, the beeper will 
sound at one of three tones. Stop when the desired 
tone (high, medium or low) is sounded.

4 Seconds

Scanner Diagnostics Mode

a

This mode allows system support personnel to trouble-
shoot problems with the scanner. Upon entering Scan-
ner Diagnostic Mode, view the 7-segment display to 
view Interface Type, Bootloader Version Number, Appli-
cation Version Number and Configuration File Number. 
This mode is used to determine if a scanner can read 
bar codes. Press the button for eight seconds or cycle 
power to exit Scanner Diagnostics Mode and reset the 
scanner.

8 Seconds

Resets Scanner

b

Only system support personnel should perform a reset.

a. Diagnostics Mode is meant for use by trained systems support personnel. Users should not need to ini-

tiate this function under normal circumstances.

b. Users should not perform scanner resets except under the direction of trained systems support person-

nel.

Содержание MAGELLAN 8300















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды