manualshive.com logo in svg

Datalogic MAGELLAN 8300, Руководство по продукции

Поделиться
Скачать
Datalogic MAGELLAN 8300 Скачать руководство пользователя страница 486

A-2

Magellan

®

 8300/8400

Controls and Indicators

The control panel consists of a green LED indicator, a Volume/Tone push 
button and a Scale Zero push button/LED indicator as described in the 
following pages. The unit also includes a beeper which can be configured 
to sound indications of scanning, weighing, and deactivation activities.

LED and Beeper Indications

Scanner and Scale LEDs

The Scanner LED indicates scanner status, and the Scale LED (which is in 
combination with the Scale push button) is primarily used to show scale 
status (see 

Table A-1

).

NOTE

Since beeper indications are configurable, your unit may not be pro-
grammed to sound all the indications listed. For more information, see

Chapter 6, Programming

 in this manual.

Table A-1. Scanner and Scale LED Indications

LED

INDICATION

DURATION

COMMENT

Scale at Zero

a

Scale (Yellow) LED on steady

The scale is at rest and reads zero weight. The 
scale is ready to weigh.

Scanner Active

a

(Normal Mode)

Scanner (Green) LED on steady and 
dim

The scanner is ready for operation. Scanning is 
immediately available.

Good Read 

Indication

a

Scanner (Green) LED - bright flash

Indicates a bar code has been read and decoded.

Program Mode
Indication

Scanner (Green) LED - Continuous 
flashing

Indicates the scanner is in Label Programming 
Mode. Cycle power to exit Programming Mode.

Содержание MAGELLAN 8300















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды