Datalogic Magellan 3450VSi Скачать руководство пользователя

Страница: 337 / 352

From Scanner to microSD Card

Product Reference Guide

327

microSD Function Summary

The following table summarizes various functions of microSD card. Contact

tech support regarding upgrade license for new features.

FUNCTION

Image

Capture

Export
Status

Export

Configuration

Load

Applic

Load

Config

Load

CPLD

Code

Feature

Upgrade

Direction

Scanner

⇒

microSD

Card

√

microSD Card

⇒

Scanner

√

Initiated by

Scanning a label

√

AUTORUN.DLS file
in microSD card

√

c. Can be initiated by scanning a label

√

microSD Function Details

From Scanner to microSD Card

Capture and save an image to a microSD card by scanning a label.

1. Insert the microSD card into the scanner.

2. Scan the Capture Label. The scanner enters image capture mode.
3. Place the item to be captured in front of the scanner.

Press and release the Camera Button. The scanner will automatically cap-

ture and save the image to the microSD card.

4. Upon scanner audio indication of completion, an image is saved to the

microSD card.

NOTE

The image file name range is from IMAGE000 to IMAGE999. if the

same name already exists in the microSD card, the scanner skips that
name and uses the next. For example, if IMAGE000.JPG is already used

in the microSD card, the scanner uses IMAGE001.JPG. The time stamp

is not real, since scanner does not have a real time clock.

Image format (.BMP, .JPG), image size (VGA, WVGA, Full size), Bright-
ness (0~9), contrast (0~9), and JPG compression ratio (0~100) are

defined in configuration.

a. The only way to load CPLD code (i.e., FPGA code) is to load a new application package.
b. The only way to do a feature upgrade is to load a new application package.

Содержание Magellan 3450VSi

































































































































































































































































































































































Результаты поиска

Содержание Magellan 3450VSi

Отзывы:

Похожие инструкции для Magellan 3450VSi

Бренды по названию

Популярные бренды

Datalogic Magellan 3450VSi, Руководство по продукции

Результаты поиска

Содержание Magellan 3450VSi

Отзывы:

Похожие инструкции для Magellan 3450VSi

Бренды по названию

Популярные бренды