manualshive.com logo in svg

Datalogic Magellan 3450VSi, Руководство по продукции

Поделиться
Скачать
Datalogic Magellan 3450VSi Скачать руководство пользователя страница 2

Datalogic S.r.l.

Via S. Vitalino, 13 
40012 Calderara di Reno — Italy
Tel. +39 051 3147011
Fax +39 051 3147205 

© 2010-2017 Datalogic S.p.A. and/or its affiliates

An Unpublished Work - All rights reserved. No part of the contents of this documentation or 
the procedures described therein may be reproduced or transmitted in any form or by any 
means without prior written permission of Datalogic S.p.A. and/or its affiliates. Owners of 
Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and 
transmit this documentation for the purchaser's own internal business purposes. Purchaser 
shall not remove or alter any proprietary notices, including copyright notices, contained in 
this documentation and shall ensure that all notices appear on any reproductions of the doc-
umentation.
Should future revisions of this manual be published, you can acquire printed versions by con-
tacting your Datalogic representative. Electronic versions may either be downloadable from 
the Datalogic website (www.datalogic.com) or provided on appropriate media. If you visit our 
website and would like to make comments or suggestions about this or other Datalogic pub-
lications, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is com-
plete and accurate, however, Datalogic reserves the right to change any specification at any 
time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many coun-
tries, including the U.S.A. and the E.U. 

Magellan is a trademark of Datalogic S.p.A. or of Datalogic and/or its affiliates, registered in 
many countries, including the U.S. and the E.U.

Patents

See 

www.patents.datalogic.com

 for patent list.

Содержание Magellan 3450VSi

































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды