Datalogic Magellan 3400VSi, Краткое руководство пользователя

Страница: 14 / 28

10 Magellan™ 3400VSi
Programming
Upon completing the physical connection between the scanner
and its host, proceed directly to the Programming Bar Codes
table below to locate the interface type the scanner is connected
to (for example: RS-232, Keyboard Wedge, USB, etc.).
Use the Bar Code Mask at the back of this manual to isolate the
bar code you intend to scan. Scan a START/END bar code once to
enter Programming Mode. After scanning the programming label
for the desired interface, scan the START/END barcode a second
time to accept your changes, exit Programming Mode and return
the scanner to normal operation.
Select other options and customize your scanner with program-
ming barcodes available in the PRG, or use the On Screen Pro-
gramming (OSP) utility available on the Datalogic website.
Interface Selection
START / END
PROGRAMMING BAR CODES
RS-232 Standard
RS-232 Wincor-Nixdorf
000105(CR)
000112(CR)