Datalogic Magellan 1100i, Руководство по продукции

Страница: 79 / 208

Character Conversion
Product Reference Guide
71
Character Conversion
Character conversion is an eight byte configuration item. The eight bytes are 4 character
pairs represented in hexadecimal ASCII values. The first character in the pair is the charac-
ter that will be converted. The second character in the pair is the character to convert to. If
the character to convert in a pair is
FF
, then no conversion is done.
For example, if you have the character conversion configuration item set to the following:
41423132FFFFFFFF
The first pair is
4142
or AB (
41
hex is an ASCII capital A,
42
hex is an ASCII capital B)
and the second pair is
3132
or 12 (
31
hex is an ASCII 1,
32
is an ASCII 2). The other two
pairs are
FFFF
and
FFFF
.
With the label, AG15TA81, it would look as follows after the character conversion:
BG25TB82.
The A characters were converted to the B character and the 1 characters were converted to
the numeral 2 character. Nothing is done with the last two character pairs, since they are all
FF
.
To set Character Conversion:
1. Scan the START/END barcode.
2. Scan the Character Conversion barcode.
3. Determine the desired string. Up to sixteen positions can be determined as in the above
example. Next, turn to the
ASCII Chart
on the inside back cover of this manual and find
the equivalent hex digits needed to fulfill the string.
NOTE
The positions not used must be filled with the
character ‘F’.
4. Turn to
Appendix C, Alpha-Numeric Pad
and scan the barcodes representing the hex char-
acters determined in the previous step. When the last character is scanned, the scanner
will sound a triple beep.
5. Scan the START/END barcode to exit Programming Mode.
START / END
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE:
FFFFFFFFFFFFFFFF hex (no conversion)
Character Conversion