Datalogic Magellan 1100i, Руководство по продукции

Страница: 18 / 208

General Features
10
Magellan
TM
1100i
Label Gone Timeout
This feature sets the time after the last label segment is seen before the scanner prepares for
a new label.
START / END
PROGRAMMING BARCODES
Sets the label gone timeout duration using hex values from 000 to 255 in increments of ten milliseconds
(10ms or 0.01 seconds). To configure this feature, scan the “START/END” barcode above to place the unit in
Programming Mode, then the “Set Linear Label Gone Timeout,” followed by the three digits (zero padded)
from the Alphanumeric table in
Appendix C, Alpha-Numeric Pad
representing the desired time value. Exit pro-
gramming mode by scanning the “START/END” barcode again.
DEFAULT SETTING FOR THIS FEATURE: 320 milliseconds (032)
Set Linear Label Gone Timeout
Productivity Index Reporting (PIR)
When PIR is enabled, label quality data is appended to decoded data before being presented
to the POS. The PIR feature allows the scanner to provide information to an external com-
puter, indicating how easy the label was to read.
NOTE
START / END
PROGRAMMING BARCODES
Disable
DEFAULT
Enable
This value-added feature is a factory-pro-
grammed option. Contact your dealer for
information about upgrading your system
to include this advanced capability.