Datalogic Heron HD3130, Руководство по продукции

Страница: 144 / 298

Enter/Exit Programming Mode Code 128
134 Heron™ HD3130
Code 128 Set Length 1
This feature specifies one of the bar code lengths for Code 128 Length Control
on page 133 . Length 1 is the minimum label length if in Variable Length on
page 133 Mode, or the first fixed length if in Fixed Length on page 133 Mode.
Length includes the bar code’s data characters only.
The length can be set from 1 to 80 characters. See
"Set Length 1" on page 245
for more detailed programming instructions.
Select Code 128 Set Length 1 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character
$CC8L1
~