Datalogic Gryphon I GFE4500, Руководство по продукции

Страница: 251 / 312

SCANNING FEATURES
PRODUCT REFERENCE GUIDE
237
Timeout (Scanning Active Time option):
Specifies the maximum duration for the
reading phase. Selections: from 1 to 255 seconds in 1 second increments.
Always On:
In Always On, the scanner is continuously scanning. When a label enters the reading
zone and is decoded, no more decodes and reading phases are allowed until the label
has left the reading area. In order to guarantee identification of the code in the reading
zone, a threshold specifies the number of scans after the successful decode that the
scanner will wait before rearming the reading phase. The transmission of the decoded
label depends on the configuration of the Transmission Mode parameter.
Object Sense:
Object Sense mode is the same as Always On mode but with the illumination system
normally off
1
. As an object or bar code enters the reading area, illumination is turned
ON. Illumination will return to the Presentation Illumination Control setting as the read -
ing phase is closed (see Automatic Mode above).
Test Mode:
Once entered, the Status LED is activated in different colors depending on the Good
Read rate of the current barcode. This mode is useful to check if the fixed scanner is
placed at correct position/distance in respect to the incoming barcodes.
Every 3 seconds, the Good Read is calculated and the Status LED is turned on as follow
-
ing:
1.
Default. The illumination can be programmed for several different operation states
(off, dim or on) while the reading phase is not active. See "Presentation Illumination
Control" on
page 87
.
GOOD READ RATE STATUS LED
0% OFF
Between 1% and 30% Blinking Red
Between 31% and 50% Fixed Red
Between 51% and 85% Fixed Orange
Over 86% Fixed Green