Datalogic Gryphon I GFE4500, Руководство по продукции

Страница: 192 / 312

ENTER/EXIT PROGRAMMING MODE 1D SYMBOLOGIES
178
GRYPHON™ GFS4500
Pharmacode Set Length 2
This feature specifies one of the bar code lengths for "
Pharmacode Length Control" on
page 177
. Length 2 is the maximum label length if in Variable Length Mode, or the sec -
ond fixed length if in Fixed Length Mode. The length includes the bar code’s check and
data characters.
Length can be set from 2 to 6 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See "
Set Length 2" on page 242
for more detailed programming
instructions.
Select Pharmacode Length 2 Setting
$CP1L2
To configure this feature, scan the ENTER/EXIT PRO -
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu -
meric characters in Appendix E, Keypad represent -
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

Length 2 = 6 (six characters)