Datalogic Gryphon I GD44XX, Краткое руководство пользователя

Страница: 29 / 52

Reading Parameters
Quick Reference Guide 19
Reading Parameters
Move the reader toward the target and center the aiming
pattern and illumination system to capture and decode
the image. See
Using the Gryphon™ I GD44XX on page 3 for
more information.
The aiming system will briefly switch off after the acquisi-
tion time, and if no code is decoded will switch on again
before the next acquisition. The illuminator will remain on
until the symbol is decoded.
As you read code symbols, adjust the distance at which
you are holding the reader.
Aiming System
A number of options for customizing control of the Aiming
System are available. See the Gryphon I GD44XX PRG for
more information and programming bar codes.
Good Read Green Spot Duration
Successful reading can be signaled by a good read green
spot. Use the bar codes that follow to specify the duration
of the good read pointer beam after a good read.
ENTER/EXIT PROGRAMMING MODE
Disabled

Short (300 ms)
Medium (500 ms) Long (800 ms)