background image

Quick Start Guide

Imager-based barcode reader with superior decoding capability and a powerful array of lens and lighting options
This guide is designed to help you set up and install the ABR 7000. For complete information on programming, performance, troubleshooting,

dimensions, and accessories, please refer to the Instruction Manual at 

www.bannerengineering.com

. Search for p/n 207634 to view the In-

struction Manual and for p/n 207635 to view the Barcode Manager Software Instruction Manual. Use of this document assumes familiarity with

pertinent industry standards and practices.

WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This

device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications.

A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.

Models

Table 1: ABR 7000 Models

Model

Resolution

Lens

Lighting

Options

Communications

Codes

ABR7109-RSE2

1.3 MP

(1280×1024 pixels)

9 mm, manual focus

Red

Standard

Serial/Ethernet

1D and 2D

ABR7109-MSE2

9 mm, manual focus

Multicolored DPM 2

ABR7112-RSE2

12 mm, manual focus

Red

ABR7116-RSE2

16 mm, manual focus

Red

ABR7106-RSE2

6 mm, manual focus

Red

ABR7106-MSE2

6 mm, manual focus

Multicolored DPM 2

ABR71L9-RSE2

9 mm, Liquid Lens Autofocus

Red

ABR71L9-MSE2

9 mm, Liquid Lens Autofocus

Multicolored DPM 2

ABR71L9-WPE2

9 mm, Liquid Lens Autofocus

White Polarized

ABR72L9-RPE2

2 MP

(1600×1200 pixels)

9 mm, Liquid Lens Autofocus

Red Polarized

ABR72L9-RDE2

9 mm, Liquid Lens Autofocus

Red Diffused DPM 2

ABR72L16-WSE2

16 mm, Liquid Lens Autofocus White

ABR72L16-RDE2

16 mm, Liquid Lens Autofocus Red Diffused DPM 2

Features

Figure 1. Models with Manual Adjustable Focus

1

2

3
4
5
6

8

10

9

11

13

12

7

1. Smart Teach Interface
2. Button
3. Good Read LED (green)
4. Internal Illuminator
5. Aiming System Laser Pointers
6. Lens
7. No Read LED (red)
8. Lens Cover
9. Focus Adjustment Screw
10. Power - Serial - I/O Connector
11. Ethernet Connector
12. Power ON LED
13. Ethernet Connection LED

Figure 2. Models with Liquid Lens Autofocus

1

2

3
4
5
6

8

10

11

13

12

7

2 Multicolored DPM models have red bright field lights and blue low angle lights for optimized reading of Direct Park Marked (DPM) codes. Red Diffused

DPM models have both groups of lights as well, but both are red and behind a diffuser.

ABR 7000

 

 

Original Document

207633 Rev. C

2021-1-6

 

Summary of Contents for ABR 7000









Reviews: