Datalogic Gryphon I GD4132, Руководство по продукции

Страница: 150 / 354

ENTER/EXIT PROGRAMMING MODE
148 Gryphon™ I GD4132/GM4102/GBT4102
Code 39 Set Length 2
This feature specifies one of the barcode lengths for Code 39 Length Control .
Length 2 is the maximum label length if in Variable Length Mode, or the second
fixed length if in Fixed Length Mode. Length includes the barcode’s check,
data, and full-ASCII shift characters. The length does not include start/stop
characters.
Table 3 provides examples for setting Length 2. See page 295 for detailed
instructions on setting this feature.
Table 3. Code 39 Length 2 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (Ignore This
Length)
07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 39 LENGTH 2 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 39Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters