Page
8
of
8
Leash Alarm
This optional setting enables or disables the Leash Mode Alarm. It specifies the number of seconds to sound the Alarm
(three tones per second) when the Reader goes out of range. This will be of benefit when conducting physical inventory or
in ensuring the Reader returns to the store if inadvertently placed in with a customer’s purchase. If the Reader is asleep or
disconnected from the Base Station, the Alarm will not work. When the Reader returns within range of the Base Station, it
will emit three ascending tones and be ready to resume scanning.
Enter Programming Mode
Scan the
Enter/Exit Programming Mode
barcode to
Enter Reader setup
then scan your option then
Exit Reader setup
.
~ (tone pattern) # > # # # # ~
~ (tone pattern) # # ~
Reader sounds Alarm tones for 2 seconds when it loses communication with the Base Station and sounds three ascending tones
when it returns within communication range – this setting is recommended for Physical Inventory.
~ (tone pattern) # # ~
Reader sounds Alarm tones for 5 seconds when it loses communication with the Base Station and sounds three ascending tones
when it returns within communication range – this setting is recommended to help ensure the Reader stays within the store.
~ (tone pattern) # # ~
Reader sounds no Alarm tones – Leash Alarm is Disabled.
Note – you may only set one Alarm option (either Disable or Enabled).
