Datalogic Gryphon 2D Series, Руководство по продукции

Страница: 176 / 354

Enter/Exit Programming Mode Code 128
166 Gryphon™ I GD/GBT/GM4500
Code 128 Length Control
This feature specifies either variable length decoding or fixed length decoding
for the Code 128 symbology.
Variable Length:
For variable length decoding, a minimum and maximum length
may be set.
Fixed Length:
For fixed length decoding, two different lengths may be set.
DEFAULT
Code 128 Length Control = Variable Length
Code 128 Length Control = Fixed Length
Code 128 Set Length 1
This feature specifies one of the bar code lengths for Code 128 Length Control
on page 166 . Length 1 is the minimum label length if in Variable Length on
page 166 Mode, or the first fixed length if in Fixed Length on page 166 Mode.
Length includes the bar code’s data characters only.
The length can be set from 1 to 80 characters. See
"Set Length 1" on page 302
for more detailed programming instructions.
Select Code 128 Set Length 1 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
DEFAULT
01 = Length 1 is 1 Character
$CC8LC00 
$CC8LC01 