QUICK START
Verify that the F732-E and all the parts supplied with the equipment
are present and intact when opening the packaging. Keep this
package should it be necessary for shipping to a technical
assistance center.
When using the F732-E terminal for the first time:
1)
Install
the
battery pack
by correctly inserting it into the F732-
E terminal (refer to par. 4.2 in this manual).
2)
Connect
the F952 cradle to the power supply and to the PC
using the RS232 cable included in the package (refer to par.
2.1 and 2.2 in this manual for further details).
3)
Charge
the batteries by positioning the terminal into the cradle.
4)
Install the EasyGen™ Demo software
from the CD onto your
PC.
5)
Load an application program
onto the F732-E terminal
through the F952 cradle using either
EasyGen™
or
SysTools™2001
(see par. 1.3 of this manual for descriptions
of the various application development programs available).
Since the EasyGen™ interpreter program is pre-loaded onto
the F732-E terminal, you can easily get started by loading one
of the example application programs from the EasyGen™
Demo software installation. (see par. 2.4 in the EasyGen™
User's Manual or par. 3.3 in the SysTools™2001 User's
Manual).
The terminal is now ready to collect data.
Press the Enter key
on the terminal to start the example program
.
6)
Download the collected data to the PC
using the
SysTools™2001
utility program. The data will be saved in the
specified .DAT Standard ASCII file (see par 4.2.1 under
Terminal Properties in the SysTools™2001 User's Manual).
xiv
