DX8200A QUICK GUIDE
5
Electrical Connections:
The details of the connector pins are indicated in the following tables:
The DX8200A scanner provides a 26-pin male D-sub connector for connection to power supply, Host interface
(Main and Aux), and input/output signals.
26-pin D-Sub Connector Pinout
Pin Name
Function
Chassis - internally connected to GND
1 CHASSIS
Cable shield connected to chassis
20
RXAUX
Receive data of auxiliary RS232 (referred to GND)
21
TXAUX
Transmit data of auxiliary RS232 (referred to GND)
8
OUT 1+
Configurable digital output 1 – positive pin
22 OUT
1-
Configurable
digital output 1 – negative pin
11 OUT
2+
Configurable
digital output 2 – positive pin
12 OUT
2-
Configurable
digital output 2 – negative pin
16 OUT
3A
Configurable
digital
output 3 – polarity insensitive
17 OUT
3B
Configurable
digital
output 3 – polarity insensitive
18 EXT_TRIG/PS
A
External
trigger
(polarity insensitive) for PS
19 EXT_TRIG/PS
B
External
trigger
(polarity insensitive) for PS
6
IN2/ENC A
Input signal 2 (polarity insensitive) for Encoder
10
IN2/ENC B
Input signal 2 (polarity insensitive) for Encoder
14
IN3A
Input signal 3 (polarity insensitive)
15
IN4A
Input signal 4 (polarity insensitive)
24
IN_REF
Common reference of IN3 and IN4 (polarity insensitive)
9, 13
VS
Supply voltage – positive pin
23, 25, 26 GND
Supply voltage – negative pin
10
19
1
18
9
26
26-pin male D-sub Connector
Main Interface Connector Pinout
Pin
RS232
RS485 Full-Duplex
RS485 Half-Duplex
20 mA C.L.
(INT-30 with C-BOX 100 only)
2 TX
TX485+
3 RX
RX485+
4 RTS
TX485-
RTX485-
5 CTS
RX485-
7 GND_ISO
GND_ISO
GND_ISO
see INT-30 instructions
Two 17-pin connectors provide access to the scanner’s local Lonworks network used for both input and output
connections to build a multi-sided or omni-station system.
17-pin Lonworks Connector Pinout
Pin Name
Function
A1
GND
Supply voltage (negative pin)
A2
VS
Supply voltage 20 to 30 Vdc (positive pin)
Cable shield A - internally connected by
1 CHASSIS
capacitor to chassis
2 n.c.
Not
connected
Cable shield B - internally connected by
3 CHASSIS
capacitor to chassis
4 n.c.
Not
connected
5 n.c.
Not
connected
6 n.c.
Not
connected
7 VS_I/O
Supply voltage of I/O circuit
8 Lon
A+
Lonworks a line (positive pin)
9 Lon
A-
Lonworks a line (negative pin)
10 Lon
B+
Lonworks b line (positive pin)
11 Lon
B-
Lonworks b line (negative pin)
12 SYS_I/O
System
signal
13 SYS_ENC_I/O System
signal
14 Reserved
Internally
connected
15 Ref_I/O
Reference voltage of I/O circuit
A1
A2
1
15
Female - Output
A1
A2
1
15
Male - Input
17-pin Local Lonworks Connectors