Datalogic DX8200, Справочное руководство

Страница: 20 / 56

DX8200 CONTROLLER
8
2
2.3.2 Ethernet
RJ45 Modular Connector
DX8200 Controller
5
HUB / SWITCH
3
4
2
1
6
5
3
4
2
1
6
7
8
7
8
RX+
TX-
TX+
RX-
n. c.
n. c.
n. c.
n. c.
n. c. = not connected
RJ45 Modular Connector
2.3.3 Host Interface
14
1
25
13
25-pin male D-sub Connector
Host Interface Connector Pinout
Pin Name Function
1 Shield Internally connected by capacitor to chassis
20 RXAUX Receive data of auxiliary RS232 (referred to GND)
21 TXAUX Transmit data of auxiliary RS232 (referred to GND)
8 OUT 1+ Configurable digital output 1 – positive pin
22 OUT 1- Configurable digital output 1 – negative pin
11 OUT 2+ Configurable digital output 2 – positive pin
12 OUT 2- Configurable digital output 2 – negative pin
16 OUT 3A Configurable digital output 3 – polarity insensitive
17 OUT 3B Configurable digital output 3 – polarity insensitive
18 EXT_TRIG A External trigger (polarity insensitive)
19 EXT_TRIG B External trigger (polarity insensitive)
6 ENC A Encoder input signal (polarity insensitive)
10 ENC B Encoder input signal (polarity insensitive)
14 IN3A Input signal 3
15 IN4A Input signal 4
24 IN_REF Common reference of IN3 and IN4
9, 13 VS VDC I/O supply voltage – positive pin
23, 25 GND VDC I/O supply voltage – negative pin
Pin RS232 RS485 Full-Duplex
RS485 Half-
Duplex
20 mA C.L.
(INT-60 Only)
2 TX TX485+ CLOUT+
3 RX RX485+ CLIN+
4 RTS TX485- RTX485- CLOUT-
5 CTS RX485- CLIN-
7 GND_ISO GND_ISO GND_ISO GND*
* For 20 mA C.L. connections, GND is the same of the scanner power supply.