background image

 

 

 

 

DS6300 COMMON FEATURES

 

25

 

Mechanical Installation: 

The DS6300 reader can be positioned and installed in the best way possible as a result of the Step-A-Head

TM

 

feature. Thanks to the separation between Head and Base, you can modify the orientation of the decoder base, 
and therefore display-keypad and connector panels, while keeping the optic head in the correct reading position. 
The reading head and the decoder base can be rotated independently from each other allowing the installation 
even in the most critical locations.

 

To rotate the head follow the given procedure: 

1.  detach the head from the base by unscrewing the four fixing screws; 

2.  rotate the head in the desired position; 

3.  loosen but don't remove the two screws on top of the head; 

4.  affix the head onto the base carefully aligning the four fixing screws and 

progressively tightening them about half-way; 

5.  completely tighten the two screws on top of the head;  

6.  completely tighten the four fixing screws.  

Step-A-Head™ Feature

 

 
The following diagrams give the overall dimensions of the reader standard model, oscillating mirror model and 
mounting bracket. They may be used for their installation:

 

 

4.33

4.

45

110

11

3

99 3.

90

76

30

74

2.99

1.

18

2.

85

85

16.5

30

3.34

0.65

60 2.3

6

1.

18

mm

inch

=

=

=

=

82 3.

22

20 0.

78

50

1.

96

18 0.

71

 N°

2

25

0.

98

10

0.4

22

0.86

42

1.65

Ø4

.1 

2

Ø0

.16

 N°

2

4.5

 N°

 4 

SL

OT

S

0.1

8 N

°4 

SL

OT

S

82 3.

22

50 1.

96

35 1.

37

50

1.96

72

2.83
100

3.93

4

0.15

 13

0

5.

12

12

6

4.9

6

106°

73.2

2.88

36

1.

41

8.5 N

°2 SL

OTS

0.33 

N°2 S

LOTS

Ø8

.5

Ø0

.33

mm

inch

DS6300 Overall Dimensions 

ST-237 Mounting Bracket Overall Dimensions 

3.35

0.65

2.

36

1.

18

3.

90

2.72

4.

11

2.

50

4.

34

4.

01

2.20

4.48

4.4

5

7.08

mm

inch

30

60

85

16.5

104.

5

63

.5

69

99

11

3

114

56

1

10.

3

102

180

 

R36

R22

R5

R1

1.65

0.4

0.86

0.

98

0.

71

3.

22

1.

96

0.

78

5.

11

0.16

0.43

0.55

0.55

2.83

3.93

0.43

1.96

1.

9

6

1.

37

0.15

1.

41

2.

95

mm
inch

42

10

22

18

25

20

50

13

0

82

Ø4.1

14

14

72

50

100

11

11

50

35

4

36

75

Ø8

.5

DS6300 Oscillating Mirror Model Overall Dimensions

 

ST-210 Mounting Bracket Overall Dimensions 

 

Head Screws 

Fixing 
Screw (4)

Содержание DS6300





































Отзывы: