DS1100
1
The laser beam output window is on the side of the scanner in DS1100-XXX0 models
and on the upper part of the scanner in DS1100-XXX1 models, (Figure A, 1).
A security system allows the laser to activate only once the motor has reached the
correct rotational speed; consequently, the laser beam is generated after a slight
delay from the power on of the scanner.
1.1.1 Indicators
The five LEDs on the scanner indicate the following:
POWER ON
(red) indicates the reader is connected to the power supply.
(Figure A, 6).
EXT TRIG
(yellow) indicates external trigger activity. Refer to par. 2.3.4.
(Figure A, 5).
LASER ON
(green) indicates laser ON state. (Figure A, 4).
GOOD READ
(red) is used to signal the possibility of a successful barcode
reading. (Figure A, 3).
TX DATA
(green). When blinking, it indicates data transmission. (Figure A,
2).
The screw holes on the body of the reader are for mechanical fixture (Figure A, 8).
1.2 MODEL
DESCRIPTION
The DS1100 scanner is available in versions that differ in regard to the following
parameters:
•
Resolution.
•
Reading window position.
•
Linear or raster models.
2
