HF-CNTL-485- 0 2 I N S T A L L A T I O N G U I D E – R E V . 0 5 P A G E 1 2 O F 2 0
2.2.1 Torque Specification
Screws should be tightened to the following torque settings:
1.7 Nm or 15 lbs / inch ± 10%
ITEM
QTY
DESCRIPTION
1
1
Cobalt Controller (HF-CNTL-485-02)
2
1
Cobalt Antenna (HF-ANT-1010-01)
3
2
Washer (Spring Lock, M5, 18-8 SS)
4
2
Screw (Socket Head Cap, M5 X 20mm, 18-8 SS)
2.2.2 Minimum Distance between Antennas
When installing multiple Cobalt HF-Series Controllers/Antennas, refer to the table
below to determine the recommended minimum distance to maintain between
adjacent Cobalt Antennas.
C O B A L T
A N T E N N A
- 1 0 1 0
- 2 0 2 0
- 3 0 3 0
- 0 7 5 0
