Datalogic AV7000, Руководство по продукции

Страница: 104 / 352

E-GENIUS
90
AV7000 LINEAR CAMERA
Accessing e-Genius
To access e-Genius :
1. Connect your computer to the AV7000
HOST NET
or
IMAGE NET
port using an RJ45
Ethernet cable.
2. Turn on your laptop computer.
3. Configure your PC’s IP Address to be in the same network as the HOST NET or
IMAGE NET
port.
4. Open a web browser and enter the IP address for the unit. If the correct IP address
is entered, the Log On window will appear.
The default setup IP address for all AV7000 cameras is 192.168.3.10 (Host), and
10.0.40.20 (Image).
5. Enter the User ID (default is setup ) and Password ( default is DLAset ) for your sys-
tem in the fields provided. Your site administrator may have modified these
defaults.
6. Select a language from the Language drop-down list.
7. Select METRIC or IMPERIAL from the Units drop-down list.
8. Click
Log On.
If the user name and password are valid, the application enables all functions available
to the user and displays the
System Info
window.
If the password is not valid, the application displays a results box with the message,
“Incorrect Password.
” Click O
K
to return to the
Log On
window and enter the correct
user name and password. If you don’t know the password, contact your system man-
ager.
To change your PC’s IP Address:
Windows 7 or 8
1. From the desktop, click the
Start
button, and then select
Control Panel
.
Before starting up or testing the AV7000, it must be connected to a CBX Connection Box
depending on the system configuration.
The user ID and password shown above provide full setup rights to the user.
If a user only needs to view system information without saving changes , the User ID: monitor
and Password: DLAmon should be used.