Sentry K350 hardware encrypted USB flash drive - User Guide
1. Click
Preferences
in the left sidebar.
2. Click the
Checkbox
for auto-locking the device and set the time-out to one of the following
time intervals: 5, 15, 30, 60, 120, or 180 minutes.
Standalone Logins
Requesting Standalone Logins
Standalone mode allows the Secure Volume of the K350 to be accessed by any computer that
has support for removable storage without running the Windows Unlocker application. Standalone
mode is controlled by a policy that is set by your SafeConsole administrator. If this mode is not
available, please contact them to enable this feature. SafeConsole administrators will define the
maximum allowed times your K350 can be unlocked in Standalone mode before the device needs
to be returned to a Windows computer to check-in.
To request Standalone logins, perform the following steps on a workstation that has a valid con-
nection to the SafeConsole server:
1. Unlock K350 and select
Connect
, confirm with Enter-button. Your K350 will show a “Waiting. . . ”
prompt.
2. Select the option Unlocker.exe inside of the Unlocker partition that can be found in File Ex-
plorer.
3. Click the Unlock button shown on the DataLocker Unlocker screen.
4. Select the Standalone tab.
5. Select the reason for the request or enter a custom reason. This information will be sent to the
SafeConsole administrator.
6. Click the
Request
button. You will receive the maximum number allowed.
Note:
The
Request automatically
checkbox can optionally be enabled by your SafeConsole ad-
ministrator. When checked, the Control Panel will automatically request the maximum allowed
Standalone logins after unlocking on a Windows workstation with a valid connection to SafeCon-
sole.
© 2021 DataLocker Inc. All rights reserved.
17
