DSD-080 User Manual V-1.0
13
In order to enter the program mode, please hold pressed
and
pushbuttons
during 3 seconds. When program mode is entered, the PROGRAM MENU will come to
the screen.
Using
or
pushbottons, program parameters may be scanned.
Modified parameters are saved to a non-volatile memory and are not affected by energy
failures.
In program mode, the required parameter is selected using
or
pushbuttons. By
depressing the
pushbutton the parameter modification is enabled.
Using
and
pushbuttons, the parameter is adjusted to the desired function and
the new value is saved by depressing the
pushbutton.
If no button is pressed during 1 minute, the unit will
automatically exit the program mode.
6.2 CHANGING PARAMETER VALUE
6.1 ENTERING THE PROGRAM MODE
6. DEVICE CONFIGURATION
