DPR-145 User Manual V-3.0
(14.09.2016)
-10-
PUSHBUTTON
OPERATION
DISPLAY
In order to enter the Alarm menu, the
MODE pushbutton should be held
pressed during 5 seconds in
SCAN,
AUTO, MAN or MAX modes.
The related channel led and the ALARM
led of the last occurres alarm will turn
on. The alarm code will be displayed.
Different alarm types (fault, trip, alarm)
may be scrolled with the
MODE
pushbutton.
If the related type of alarm has not
occurred on any channel, then (
---
) wil
be displayed.
If the same alarm type occurred on more
than one channel, alarm messages may
be scrolled with up/down arrow
pushbuttons.
In order to exit alarm menu, hold
pressed the MODE button during 5
seconds. The previous operating mode
will be resumed.
4.1 ALARM MENU
