Datakom DKM-409, Руководство пользователя

Страница: 15 / 36

J38D01 - 15 -
8. DEVICE CONFIGURATION
8.1 INTRODUCTION
In order to offer the maximum flexibility to the user, the unit has several configurable
parameters.
•
Device configurations
LCD Contrast
Language selection
Modbus node address
User display screen
configuration
•
Input/Output Configurations
Reference value setting
Input Configurations
Relay Configurations
•
Line Configurations
Clearing Counters
Resetting demand values
Overcurrent configuration
Setting the current transformer ratio
Setting the voltage transformer ratio
Input calibration
•
Return to factory settings
In order to enable the configuration menu,
hold both MENU buttons pressed for 3 seconds.
When the configuration mode is entered, the
password entry screen will be displayed.
A 4 digit password must be entered using buttons.
The factory default password is
“9876” . Each digit
is adjusted with MENU buttons and the next digit is
selected with SET button.
When the configuration mode is entered, a list of
available configuration topics will be displayed as
in the below screen.
In order to exit the configuration menu,
hold both MENU buttons pressed for 3 seconds.
If no button is pressed, the unit will automatically
close the configuration menu after 30 seconds.
Navigation on the list is made with and
buttons. Selected configuration topic is shown in
reverse video (black on white). In order to enter
inside a configuration topic, please press
button.