Datakom DKM-0224, Руководство пользователя

Страница: 8 / 13

DKM-0224 User Manual V-1.0
(11.08.2016)
-8-
BUTTON FUNCTION
If the pushbutton is pressed all fault leds turn off, Horn and
Bell relays are released. If the fault signal still persists, the
fault alarm re-appears again. This button is also used in
settings menu.
If the pushbutton is pressed, all leds flash green and red in
sequence, the internal buzzer sounds, Horn, Bell and
Watchdog Relays turn on and off with a period of one
second. During this test, if the pushbutton pressed for 3
seconds, the buzzer function can be disabled/enabled. By
pressing the pushbutton again, module exits from the test.
This button is also used in settings menu.
If the pushbutton is pressed, all leds turn-on with the pre-
adjusted color. (If it is pressed again, the unit returns back
to normal operation.) After pressing it short, if this button
is pressed for 3 seconds, then the first Led flashes with the
pre-adjusted color and the unit enters the settings menu.
If the pushbutton is pressed, fast flashing leds turn into
slow flashing(or Steady On) state, the internal buzzer turns
off. Horn and Bell relays are released. This button is also
used for exiting the settings menu.
2. PUSHBUTTON FUNCTIONS