Datakom DKM-0224, Руководство пользователя

Страница: 4 / 13

DKM-0224 User Manual V-1.0
(11.08.2016)
-4-
Before Installation:

Read the user manual carefully, determine the correct connection diagram.

Remove all connectors and mounting brackets from the unit, then pass the unit through
the mounting opening.

Put mounting brackets and tighten. Do not tighten too much, this can brake the
enclosure. Spring type brackets do not need to be tightened.

Make electrical connections with plugs removed from sockets, then place plugs to their
sockets. Otherwise, the sockets may get damaged.

Be sure that the relay outputs are not over-loaded. Use auxiliary contactors if necessary.
Below conditions may damage the device:

Incorrect connections.

Incorrect power supply voltage.

Voltage at measuring terminals beyond the specified range.

Current at measuring terminals beyond the specified range.

Overload or short circuit at relay outputs.
Below conditions may cause abnormal operation:

Power supply voltage below minimum acceptable level.
1. INSTALLATION INSTRUCTIONS