Datakom DKG-325, Руководство пользователя

Страница: 4 / 40

DKG-325 User Manual Firmware V-56
- 4 -

Electrical equipment should be installed only by qualified
specialist. No responsibility is assured by the manufacturer or
any of its subsidiaries for any consequences resulting from the
non-compliance to these instructions.

Check the unit for cracks and damages due to transportation.
Do not install damaged equipment.

Do not open the unit. There are no serviceable parts inside.

Fuses must be connected to the phase voltage inputs, in close
proximity of the unit.

Fuses must be of fast type (FF).

Disconnect all power before working on equipment.

When the unit is connected to the network do not touch
terminals.

Any electrical parameter applied to the device must be in the
range specified in the user manual. Although the unit is
designed with a wide safety margin, over-range parameters
may reduce lifetime, alter operational precision or even
damage the unit.

Do not try to clean the device with solvent or the like. Only
clean with a dump cloth.

Verify correct terminal connections before applying power.

Only for panel base mounting.
WARNING
Use of fuses of higher rating than allowed may
result in serious hazards.
SAFETY NOTICE
Failure to follow below instructions will result in
death or serious injury