DKG-119J User Manual V-32
(09.07.2012)
DKG-119J MANUAL AND
REMOTE START UNIT
CANBUS VERSION
True RMS measurements
ECU control and monitoring through J1939
CAN
J1939 ECU warnings displayed as text
Various engine brands and models available
Engine control
Generator protection
Built in alarms and warning
Dual genset mutual standby operation
Load shedding, dummy load
Gas engine support
Engine idle speed control
1 phase genset voltage inputs
1 phase genset CT inputs
Engine oil pressure measurement
Engine coolant temperature measurement
Fuel level measurement
Genset active power measurement
Genset power factor measurement
Engine rpm display
Remote Start operation available
Mains simulation input
Engine Idle speed control
Periodic maintenance request
Engine hours counter
Event logging with complete measurement
values
Stores last 200 events
Statistical counters
3 level password protection
Programmable parameters
All parameters field adjustable
Return to factory settings enabled
Logic level serial port
Firmware downloadable from serial port
Free MS-Windows Remote monitoring SW:
-monitoring and control
- download of parameters
GSM-SMS sending in case of alarm
Modem call in case of alarm
MODBUS communication
128x64 graphic LCD display
Triple language support
Customer logo display capability
Configurable analogue inputs: 3
Configurable digital inputs: 5
Configurable digital outputs: 2
Total digital outputs: 4
Survives cranking dropouts
Sealed front panel
Plug-in connection system for easy
replacement
Dimensions (96x96x53mm)
FEATURES