Datafox KYO Inloc, Руководство пользователя

Страница: 112 / 157

Manual Datafox KYO Inloc page 105 date: 16.12.2020 Version: 04.03.15.XX
5.7.10.2. Configuration
Implementing supervised door using the Datafox Access Control modules requires the setup using
the ReaderProps list. This list is required for BDS and anti-passback as well. The following specifi-
cation of the ReaderProps thus contains minimal field length specifications.
5.7.10.3. Requirements for the ReaderProps entry
The ReaderProps list requires at least 5 columns when used for supervised doors.
Name Type Length Description
RefReader Number 4
Reference number of the reader, where the re-
lay to be released is placed.
Type Number 2
Type associated to the supervised door (5)
functionality.
Mode Number 1
Mode used for interpreting the digital input
0 (Input low) = The door is opened
1 (Input high) = The door is opened
RefReaderInput Number 4
Reference to the reader (or door module or ac-
cess controller) that provides the digital input for
the supervised door.
Input Number 2
Id of the digital input that changes upon open-
ing of the door.
0 = the door is not supervised.
1-32 = Digital input wired to the door contact
5.7.10.4. Logical conditions implemented by the access controller
The following conditions are checked by the access controller:
(1) The check of supervised doors is started upon the change of a
digital input.
(2)
Next it is checked, if the digital input (“Input”) and the reader
(“RefReaderInput”) are present within the same a supervised door
entry of the ReaderProps list.
(3)
If so it is checked, if the input’s state matches the mode
(“Mode”). If the Mode is set to 1, the input’s state has to be High
(1) has well, for the Mode being 0 the input has to Low (0). If the
Mode matches the input’s state, the state of the relay is checked.
(4) Next all relays associate to the referenc
ed reader (“Re-
fReader”) that are set for a finite amount of time are being re-
leased. If the relay has be set to free access (FRA), blocked ac-
cess (BLA) or due to a time model associated, it is not released.