Datafox Evo 4.3 Скачать руководство пользователя страница 115

Страница: 115 / 146

Manual Datafox Evo 4.3

Page 109

Date: 27.12.2017 V 04.03.09.XX

5.7.10.3.

Description of the table „Action2"

The switching from „Action“ to „Action2“ it’s a setting in the StudioIV.

Name

Data type

Length

Description

Number
(int)

Action number, it can occur several times due to several actions that have to be
worked through.

RefGroup

Number
(int)

Only work this action for the listed Group.
0 = for all groups work this action.

RefTime

Number
(int)

Give a time, and only works this action to this time.
(0 = works ever)

! Not mixed with times in RefTimeRelais!

RefReader
Relais

Number
(int)

Reference to the list reader, action to switch a relay on this listed reader in table
reader.

PortOut

Number
(Byte)

Switch relay 1 or 2

Elapse

Number
(int)

Specifies the period of time a relay is switched

! The time is in seconds!

If here listed a (-1), then switch the relays to off
If here listed (0), then switch the relay for RefTime of for period on.

RefReaderLED

Number
(int)

This is a reference to the table Reader to switch the LED on other modules

RefTimeRelais

(nur für Auto-
matische
Zeitsteuerung)

Number
(int)

The time model indicates when the output may be switched. (0 = not used).
(Automatic time control)

! Action how here work with automatic times, be not mixed with action from the
access!

Caution:

By transferring the table "Action 2" to the unit, the table "action" is replaced. Thus, only
entries in the table "Action 2" will be considered.

Caution:

Would you like to continue working with the "action" table, the table "Action 2" may not
be transferred to the device.
A table "Action 2" has already been transferred to the device, it must be cleared by load-
ing a new setup.

Содержание Evo 4.3



















































































































































Результаты поиска

Содержание Evo 4.3

Отзывы:

Datafox Evo 4.3, Руководство пользователя, Страница: 115 / 146

Результаты поиска

Содержание Evo 4.3

Отзывы: