background image

 Fig. 3

Fig. 1

 Fig. 4

  Fig. 5

   Fig. 2

   Fig. 6

   Fig. 7

Installation Instructions:

Figure 1:

Top view - shows needed space between the 

drywall and the studs.

Figure 2:

Refer to the included template to make your cutout. Once you have made the 

cutout, return to Figure 3 of this ins

t

ruction sheet and complete installation

.

Figure 3:

Run the source of power to the included Old Work Electrical Box. Be sure to follow all 

local electrical codes.

Figure 4:

Connect the su

p

plied Duplex 

Surge Suppressor

 to a piece of 14/2 w

i

th ground UL 

approved electrical building wire that you have pulled from a power source. Strip off 

approximately 3 inches of the outer jacket of the wire. Be careful not to cut the jacket of 

the inner wires. Connect the hot line (black) wire to the brass colored terminal screw and 

neutral (white) wire to the silver colored terminal screw. Be sure to connect the grounding 

(green) or bare grounding wire to the green colored terminal screw. Once you have wired 

the Duplex 

Surge Suppressor

, screw it into the Old Work Electrical Box until the 

receptacle is firmly secured.

Figure 5:

Use the four provided screws to secure the Old Work Electrical Box and Receptacle 

to the mounting studs on the back

 

side of the Expandable Media Box.

Figure 6:

Important: 

Before installing the Expandable Media Plate into the template opening, make 

sure to pull your low voltage cables through the low voltage cable opening. 

After 

pulling 

low voltage 

cables

 through: 

Insert 

the receptacle side of the 

Expandable Media Box

 first

,

 slowly sliding it into the opening. 

Be sure the four (4) metal 

wings are folded in and s

wing the 

right

 side of the Media Box into position until the entire 

Media Box is flush with the wall. Now screw down the screws with wings; these wings 

fasten tightly against the back of the drywall. Push Expandable Cavity into place.

Figure 7:

Your new Expandable Media Box with Duplex 

Surge Suppressor

 is now installed and 

ready for the TV mount to be installed. Install your TV mount bracket per the TV bracket 

manufacturer’s instructions.

Page 2 of 

2

888.223.7977

770.662.8205

www.DataCommElectronics.com

Instruction / Installation Sheet

 

Expandable Media Box

with Duplex 

Surge Suppressor

Part # 45-00

6

1-WH CONTINUED

05/01/2014

Отзывы: