Datacom Datacom DT-103, Руководство по эксплуатации, Страница: 8 / 23

6
SYSTEM CONNECTION
„
Connect the AUDIO, VIDEO , and TV Scart output terminals with the corresponding terminals of
the TV set
„
Adjust the direction of the dish according to the antenna signal level displaying on the screen
„
Connect the F terminal to both ends of the cable, one end to the LNB terminal of satellite
antenna and the other end to “ SAT IN ” input terminal of this unit
„
Please make sure that the F terminals are connected well
„
The Serial data interface is used to upgrade the software or to enrich the date bank of the
machine via the manner of pc to pc or box to box
„
Do not tie the cable line with the power line in case influencing the reception
POWER ON
„
Plug the machine and punch its power switch to keep the “ ON ” status, the unit enters its normal
mode
„
Punch the standby key on the remote controller to the remote receiving window of the machine or
the key on the set, which enters its standby mode and the “ standby ” character appears on the
screen for seconds. Re-punch the key; the unit recovers to its normal
„
If the channel has been locked, the lock indicator lights up