Datacom Datacom DT-103, Руководство по эксплуатации, Страница: 17 / 23

15
Return the interface to the Edit and light the Edit
Transponder menu tape, the image shows
Delete : punch the
Ʒͩ
key to move the cursor upwards
or downwards, punch the red key and the window with
“ YES ” and “ NO ” appears, punch the red key to delete it
and the green one to exit
Punch the green key to add the “upward/ downward”
symbol on the end of the transponder parameter tape,
punch the
Ʒͩ
key to move the tape to the suitable
situation and release
Change : refer to the relative introduction segment of Edit
Satellite
Add
: return to the Edit Transponder and force down the
blue key to enter the image:
Punch the digit-keys to finish the input of parameter of TP
frequency , LNB polarization , Symbol Rate, punch the
OK key to save the new added transponder and which can
be detected in the interface of Select Transponder of
Select Satellite
LOCK SETUP
Return the interface to the Main Menu , light the Lock
Setup menu tape and the image shows:
Light the Change PIN instruction tape and punch the OK
key to enter its interface
To realize creating one new private code by this instruction:
the default or primary code is “
0000 ”. First, input the
correct current code and then the new one and verify it.
The verified code will become the current one and the
information window with “
password changed! ” phrase
flashing on the screen for seconds; the information window
shows the operation is successful
EDIT TRANSPONDER