Datacom Systems VS-1200 Series, Руководство пользователя

Страница: 35 / 54

Initial Configuration 35
© 2009 Datacom Systems Inc
Step 8.
You are now connected at the
Enter Username:
prompt. Usernames and passwords are
case-sensitive. Type
Administrator
(default value) and press the
Enter
key. At the
Enter
Password:
prompt, type
admin
(default value) and press the
Enter
key to display the command
line
>
prompt. At the command line
>
prompt, type
su
and press the
Enter
key. At the
Enter
Password:
prompt, type
password
(default value) and press the
Enter
key to display the command
line
#
prompt. To see a list of available commands, at either the
>
or
#
command line prompt, type
?
and press the
Enter
key .
Step 9.
SET IP (SE IP) by typing se ip xxx.xxx.xxx.xxx corresponding to a valid IP address for
your network. Press the
Enter
key to continue.
Step 10.
SET SUBNET (SE SU) by typing se su xxx.xxx.xxx.xxx corresponding to your
network's subnet mask. Press the
Enter
key to continue.
Step 11.
SET GATEWAY (SE GA) (if needed) by typing se ga xxx.xxx.xxx.xxx corresponding
to your network's default gateway. Press the
Enter
key to continue.
Step 12.
SHOW (SH) by typing
sh
and press the
Enter
key to display and affirm that the pending
IP Address, IP Subnet and IP Default Gateway match the intended Local Area Network input IP
Address, IP Subnet and IP Default Gateway.